OpenVox A1200P/A800P + Dahdi(NEW!!)

I've spent some time trying to find why opvxa1200 module is loaded, lspci shows the card, but no spans are detected.

If you suffer from the same thing disable "netjetpci" module in the system. It silently makes this thing happen.

Some other modules could affect "hisax" and "isdn"

The best way to disable this is editting /etc/modprobe.d/blacklist and adding those three lines:


blacklist isdn
blacklist hisax
blacklist netjetpci

hello:
yes, it is true.
1) if you have mISDN in your system, you have to remove the netjetpci, otherwise, A1200P/A400P will be conflict with netjetpci. please remove it or when you compile mISDN, do not compile netjetpci.
2) isdn is a module built-in with centos, you can disable it from SERVICE, do not start it up.
thanks indigogrup for your input and sharing.
regards!
James.zhu

Hi James,

This is Suresh working as a Telecom Engineer in Wiselink Technologies, India. I have been facing the below error when iam trying to do 'Make' in dahdi-linux-2.0.0 or 2.1.04 on Fedora Core 9.

echo "You do not appear to have the sources for the 2.6.25-14.fc9.i686 kernel installed."
You do not appear to have the sources for the 2.6.25-14.fc9.i686 kernel installed.
exit 1
make: *** [modules] Error 1

Please help me out in this asap...

Thanks in advance

Suresh Vemparala
Telecom Engineer
WISELINK TECHNOLOGIES PVT LTD
#201,Cyber Residency,Shilpa Enclave,
Madhapur,Hyderbad - 500080
Andhra Pradesh - India
Phone : +91-4023111109,40171109
Mobile: +91-9866810002

hello,
yum install your kernel source, you are missing that for compiling dahdi.
james.zhu

上面的下载链接坏了。opvxa1200.c应当是： http://downloads.openvox.cn/pub/drivers/dahdi-patches/a800p_a1200p/opvxa1200.c

i] Last edited by dosimple at 2009-12-29 18:22 [/i

hi,
I followed the step above to install the card in Trixbox 2.8.0.4 with A1200P DAHDI 2.4 and to compile gave me the following error (when i do "make" in folder "dahdi-linux":
make -C drivers/dahdi/firmware firmware-loaders
make[1]: Entering directory `/usr/src/dahdi-linux-2.4.0/drivers/dahdi/firmware'
make[1]: Leaving directory `/usr/src/dahdi-linux-2.4.0/drivers/dahdi/firmware'
make -C /lib/modules/2.6.18-164.11.1.el5/build SUBDIRS=/usr/src/dahdi-linux-2.4.0/drivers/dahdi DAHDI_INCLUDE=/usr/src/dahdi-linux-2.4.0/include DAHDI_MODULES_EXTRA=" " HOTPLUG_FIRMWARE=yes modules DAHDI_BUILD_ALL=m
make[1]: Entering directory `/usr/src/kernels/2.6.18-164.11.1.el5-i686'
CC [M] /usr/src/dahdi-linux-2.4.0/drivers/dahdi/opvxa1200.o
/usr/src/dahdi-linux-2.4.0/drivers/dahdi/opvxa1200.c: In function âwctdm_watchdogâ:
/usr/src/dahdi-linux-2.4.0/drivers/dahdi/opvxa1200.c:2205: error: âstruct dahdi_spanâ has no member named âpvtâ
/usr/src/dahdi-linux-2.4.0/drivers/dahdi/opvxa1200.c: In function âwctdm_initializeâ:
/usr/src/dahdi-linux-2.4.0/drivers/dahdi/opvxa1200.c:2337: error: âstruct dahdi_spanâ has no member named âhooksigâ
/usr/src/dahdi-linux-2.4.0/drivers/dahdi/opvxa1200.c:2339: error: âstruct dahdi_spanâ has no member named âopenâ
/usr/src/dahdi-linux-2.4.0/drivers/dahdi/opvxa1200.c:2340: error: âstruct dahdi_spanâ has no member named âcloseâ
/usr/src/dahdi-linux-2.4.0/drivers/dahdi/opvxa1200.c:2342: error: âstruct dahdi_spanâ has no member named âioctlâ
/usr/src/dahdi-linux-2.4.0/drivers/dahdi/opvxa1200.c:2343: error: âstruct dahdi_spanâ has no member named âwatchdogâ
/usr/src/dahdi-linux-2.4.0/drivers/dahdi/opvxa1200.c:2346: error: âstruct dahdi_spanâ has no member named âpvtâ
make[2]: *** [/usr/src/dahdi-linux-2.4.0/drivers/dahdi/opvxa1200.o] Error 1
make[1]: *** [_module_/usr/src/dahdi-linux-2.4.0/drivers/dahdi] Error 2
make[1]: Leaving directory `/usr/src/kernels/2.6.18-164.11.1.el5-i686'
make: *** [modules] Error 2

someone can help me please.
thanks
Pedro Reis